CUSTOMER
TECH - ARCHIVES
Category
OPEN Close
- First Egpis Hits:3120 49.150.94.87
- 2020-04-06 11:29:47
[Walk in Freezer, Chiller] How to "HTC" Connections
)
To use TC in connection with the HTC (TC) terminal of the control box, the temperature must be set to 30 to 35 degrees.)
)
)
To avoid overheating TC, short the HTC at the terminal block and separate the TC (temperature controller) wire of the evaporator.
)
)
To use overheat protection (HTC), connect the two wires to the TC of the evacuator.
*How to control the temperature of the injector to prevent compressor overheating
)
*90 to 100 degrees is appropriate. If not in use, just turn off the thermostat.
*When the temperature of the scroll type compressor is high,
the injector sometimes operates, so the temperature must be set slightly higher.
#Remote control Freezers Philippines, Monitoring Freezer, Monitoring chiller, Remote control setup, WiFi setup, Walk in Freezer Baguio, Chiller, Cooler, Walk in Freezer Manila, Philippines Cold Room, Cold rooms built-in and remote, Injection, Injector
EGPIS INDUSTRIAL MACHINERY TRADING/First EGPIS Merchandise,
Manila 02)8809-2084, Pampanga 045)457-6394, 0927-321-8556
Comment[0]
OPEN Close
EGPIS INDUSTRIAL MACHINERY TRADING
CEO : ALICE MARGARITA GRACE Address : Blk 12, Lot 1, Victoria St., Ignactius Subd., Angeles City, Pampanga, Philippines Business Registration No : 926-27-16420 Tel : 0454576394
Phone : 0927-321-8556 / 0928-987-1000 / 0917-777-2918 Email: freezer.kr@gmail.com